Category Archives: home safety

Getting Rid of Black Mold – Tips Worth Remembering

Black mold exposure is toxic and can cause various discomforts like nausea, vomiting or even fainting in severe instances. For those with respiratory problems, it can cause an allergic reaction which will trigger your condition; prolonged exposure to this type of fungi can even make the ailment worse. So, with all that was mentioned, it should be therefore clear that getting rid of black mold (or any other type of mold for that matter) should fall in your list of “house maintenance” priorities and if not at the top, at least close to it.

How big is your problem?

Mold infestation can be generally separated in three categories; small, medium, and pain in the neck. You will generally be able to handle small and medium jobs as this mainly involves relatively minute or averagely manageable spots getting affected. There are also a variety of cleaning agents and disinfectants that are specially formulated to deal with the problem. You can even create your own mold busting formula if you wish to do so.

Pain in the neck category however will be different as it is usually the result of neglect over the months or years. This means that since you ignored the problem for quite a while, it’s going to make you pay – a lot – as the typical cost of mold removal undertaken by experts can range anywhere from $500-$4000. For even bigger jobs, expect to pay through the nose.

Photo By: Satemkemet

What do you do to prevent this?

Well, ridding yourself of black mold and keeping them out of the house is actually not that difficult. The very first thing you would want to do would be to determine the source of the problem. Damp and dark areas for example should be eliminated, leaks plugged, and a dehumidifier is highly recommended. For medium cleanup jobs, remember to isolate the room you’ll be cleaning in order to prevent spores from spreading and infesting other areas of the house. Keep all of this in mind and you’ll find your home mold free in no time at all.

Home Made Mold Cleaning Solutions

There are a variety of mold cleaning solutions readily available in your home. For example, chlorine bleach is a great de-molder which is especially helpful when trying to remove mold buildup in grouting between tiles. All you need do is spray on chlorine bleach and leave it for up to an hour. Then, simply scrub the grouting with a small scrub-brush or toothbrush. The black mold should clean off right away.

Another good home remedy for cleaning small mold spots is either vinegar or lemon juice. Unlike chlorine bleach, which can be dangerous to the body should fumes be inhaled, these are both safe to handle and use. Simply mix equal parts of water and vinegar (or lemon juice), let it sit for a while and then wipe off with a cleaning rag. Remember to throw away the cleaning rag once you are done to eliminate the possibility of transporting mold spores to other places in your home.

If you have a problem with mold on your carpet, patio cushions or other furniture you may find that it is better to use borax.  You may not have this available in your pantry, however you can  usually find it tucked away on the supermarket shelves next to the laundry detergents. It is a great cleanser. You can either sprinkle it on and then vacuum it off after letting it sit for an hour, or you can make a paste out of borax and water to spread over the moldy material. Leave it on  for a while and then wipe it off with a damp rag.

There are also other helpful recipes for natural and safe mold removal treatments. Remember though, these home treatments are most effective for cleaning up smaller spots of mold around your home or to use on a regular basis as part of your routine kitchen, bathroom or other living area cleaning.

Choosing The Right Emergency Radio May Save Your Life

Following are important tips about how to choose an emergency radio, possibly one of the most important choices you will ever make. In fact, having your family prepared for emergencies is a high priority. Experts unanimously agree that one of the most important tools in your line of defense against threats such as hurricanes, wildfires, tornadoes, floods and even chemical spills is a dependable emergency radio. Knowing how to choose an emergency radio for your situation is all too important!

The National Oceanic and Atmospheric Administration (NOAA) has established broadcasts designed to deliver emergency information throughout the country. Information is broadcast that is critical to those in threatened areas.

Remember: Most TV and radio stations broadcast emergency alerts, but information conveyed in that way is not as complete or as specific as a continuous broadcast alert for your dedicated emergency radio. This short article is designed to help you make a good decision in choosing a radio that is right for you.

Know your area! Consider the weather patterns and any potential hazards that are common to your surroundings. Not everyone lives in a flood zone, but you may have to traverse one in your daily travels. Do you live in Tornado Alley? Know these things to be safe.

Do you require a programmable, “smart” radio that you can program for specific alerts? These can bypass other nonrelated alerts. Not all emergency radios come with this feature.

Make sure that you can receive NOAA weather alerts!

Will you be able to hear the alerts? Consider where your radio will be located, and how well you will be able to hear it. Some people are just harder to rouse than others are. This could be very important.

How about the power supply? Batteries? AC power? Self-regenerating (crank powered) radios are also available. Have solid, dependable backup power for your radio. Do not depend on a single power source as any can fail.

If your radio is used for boating or camping, make certain that it is waterproof.

Finally, read and research before you buy. Some radios are simply more powerful or more dependable. Nothing is more important to your decision than your own research.

Bedding Bugs are Best Eliminated Quickly

You have probably heard plenty of important news about bed bugs. You may have also heard how hard it can be to get them out of your house once they have entered. They spread quickly and multiply fast and they can invade your home quite easily. There are some bed bug treatments that actually can work and you w ill not even have to throw our your bedding or recover your furniture. If you have a mild, or even severe case, you can use these treatments to rid of the bugs for good.

You will want to start bed bugs treatments as soon as you notice the first sign of a bug. To figure out how far the infestation has gone, look at your mattress and bedding along with other items in your house with upholstery. Watch closely for signs of the bugs and cover any items with plastic if they seem to be infested. This can keep the bugs from feeding and from spreading any farther into your house.

Steam can help kill the bugs and any eggs that have been laid. If you have a steamer, you can operate this treatment on your own. Use filtered water and thoroughly run steam over any affected area. Do not neglect the frame of your bed or any other surface surrounding items that have been infested. If you do not have a steamer on hand, a bed bugs exterminator can help provide what you need.

There are also several brands of poison on the market. You will need to treat your whole house when you use the poison or they may not work. You will not want the bed bugs to simply move to another location, you want them gone for good.

If you find bed bugs in your home, you will want to rid of them as soon as you can. If the infestation is too thorough, you may want to call a professional bed bug exterminator to help you deal with the issue.

Clean Mildew Off Your Household Surfaces

A straight forward mold and mildew removal product will clean most infestations in your bathroom or kitchen but you will probably need something a little more specific to help you with mildew on other surfaces. Anywhere in your home that is warm and just a little moist can be a breeding ground for mildew. When you find mold on surfaces like clothing, paper, leather goods or upholstery you will need to try some different mildew removal methods.

Take a little care when cleaning mildew off textiles. Whether you are using a store bought detergent or a home made solution check that your fabric is colorfast before doing anything? Before spending money on a commercial cleaner try a home made remedy. Mix a gallon of cool water with a cup of buttermilk and then place your textile in this solution for up to 12 hours. Rinse off and then was again this time in a washing machine.

Mildew removal from leather goods, whether it be a jacket or a pair of gloves can be done but needs a more considered approach. To begin with take the leather item out of the home and dust off the top dried surface of the mold if there is one. Clearly doing this job indoors is a bad idea. The rest of the mold or mildew can be wiped off with a cloth that has been dipped in a fifty/fifty solution of water and denatured alcohol. Be sure to place item in a completely dry place before applying any polishing agents.

When it comes to books or other papers affected by mildew you will probably only want to save the most valuable items, the rest should head for the trash. For those things that you want to save the key is to get them bone dry first. To do this you can simply place the item in a hot and dry environment or indeed in a cool but well ventilated room. The drying process will go quicker if you scatter a little talcum powder or cornstarch over the damp areas. Once dry just brush off everything with a soft rag.

Effective Mold and Mildew Removal

Appropriate mold and mildew removal in the home is very important especially if there are children and pregnant women in the home. This is because mold has some severe health risks for pregnant women, children and the elderly. Mold can also be a lot more dangerous than usual to those with some kind of respiratory condition like asthma. All such people can be severely affected by mold and it can produce some dire consequences. This is why mold infestation must be regarded as a very serious problem and the people should be saved from the infestation in every way possible. If the infestation is over an area of ten square feet or less, you can take care of the infestation on your own but if it is any more than that then it means the problem is severe and only professionals should be able to handle it. This is the problem with mold removal in home – you need to make it an urgent problem to ensure that every one in the home is safe from the common side effects and reactions. Mold can also be the cause of certain allergic reactions and every one pretty much reacts to mold in a different way – this is why it might be a little difficult to detect at times – there is no one symptom for mold infestation in the home.

Mold can seem quite harmless but actually can it severely ruin a lot of things. Most items that mold attacks are not always saved by the removal of the mold. Especially porous items of all kinds like tiles, wooden items and other similar items might be ruined by mold to a very severe extent and would needed to be thrown out in most cases. This is because mold can get into the deep crevices of these objects and no matter what mold removal product you use or how you try to get it out, these things cannot be salvaged. Even if you keep the stained item, it might have mold re-growth because it won’t be properly destroyed. There are special kinds of removers and black mold removal products for toxic black mold but no mold clean up should be attempted without making use of the right kind of protective gear. This gear should include a few basic items like a respirator, gloves, out wear and protective eye gear. The outer wear should be any old outfit that can be discarded and taken off easily. The protective eye wear should have a hole for ventilation in it so there is no chance of fogging and deterring visibility but it should protect you from mold spores in the air. The gloves should be as long as possible, reaching to at least the forearms and the material will depend on the kind of cleaning solvent you are using. The respirator should be a standard N 95 respirator.

You can conduct mold and mildew removal on your own if you have the right mold removal products.

Removing Bathroom Mold For A Cleaner, Healthier Home

Black mold, a toxin-based fungus which is dangerous to health grows wherever moisture is present in your home. The main causes for black mold developing in your home are due to roof leaks, leaky faucets or any other leaks. Removing bathroom mold and black mold are absolutely necessary as these can cause very serious problems to your health.

People exposed to black mold over a long period of time may develop acid reflux, sinus, allergies, respiratory and digestive problems, and might even experience agonizing body pain. This type of mold can cause death, too.

Being life-threatening, it is very important to get the proper treatment, if you identify black mold symptoms. It is essential to get rid of the mold and spores to take out the fungus in the right manner. Mold treatment products and techniques can be found at local stores or even online. It is always good to buy the best brands of products which can effectively treat the root of the mold problem.

When the area is treated, it is necessary to plug all leaks and clean the area thoroughly with a sponge, making sure that it stays clean all the time. Discard any items you find discolored from that area to avoid the fungus from spreading.

If there are leaks found behind your walls, a plumber will be the most qualified person to fix this problem, as treating the fungus on your own will not help in any way. So, take suitable measures to prevent humidity and plug all leaks. Oftentimes, it takes mold only a day to develop. Once the source of the problem has been identified, immediately seal all areas that are contaminated.

Vents, doorway or openings are the starting points that need to be sealed by covering them with plastic sheets, duct tape is the most effective adhesive to keep the plastic firmly in place and prevent black mold from entering your bathroom or any other area of your home. Dust particles are responsible for the spread of spores, so it is imperative to keep the area clean.

Make sure to dust your home regularly, and also purchase quality bathroom mold and black mold removal products to completely eliminate all traces of fungus from your home.

Considering the Options for Working at Heights at Home

Whether you are planning to do some repair work on your house or garage, or are thinking of putting up an entirely new structure, being able to do the job effectively and safely will mean a successful project.  You can start by considering the options for working at heights, and decide which option is best for you.

Scaffold towers are not only for professional construction workers.  They can be great for the home handyman, too.  One of the most important benefits of an aluminum scaffold tower is its strength.  When it is built correctly, it is the strongest and safest aids to working in high places.  If you know how to build one, it can be an excellent DIY project before you begin your actual work.  A second benefit is that the tower can be made to hold more than one person at a time.

A step ladder is good for lower heights.  The benefits of step ladders include the additional element of safety you will have from a ladder which has both parts of its bottom completely on the ground.  Even a person who is hesitant about heights will be confident in using it.  While these ladders can be found in larger sizes for working with heights, they still provide the sense of security you need to work effectively.

A lean-to ladder is the ideal product for working on higher buildings.  Also, when you have a project that requires you to be up close to the building, such as painting, it provides the closeness you need to get the job done.  In addition to these benefits of lean-to ladders, it is easy to move it whenever necessary.  In contrast to towers that are attached to the building itself, this feature will allow you to move around the building in order to work on numerous parts of the buildings.

Painting, roofing, and minor repairs do not have to be difficult.  Even constructing a new garage or other structure can be a great do-it-yourself project.  Making the job easier and ending up with the quality results you want starts with choosing the option that is right for you and best for the project, and with making sure that you can safely accomplish the task.

How Epoxy Coated Floors Contribute to Workplace Safety

Epoxy coating is a practical and efficient way to contribute to a safe work environment. The safe, non-slip texture offered by epoxy flooring will reduce the number of accidental slip and fall incidents, reducing your workers compensation premiums and exposure to potential lawsuits.

Textured Epoxy Floor Coatings

Flooring professionals can install epoxy coated floors with various textures, custom-tailored to the needs of your business. Textured epoxy paint provides a safe, no-slip surface. When combined with other safety rules and procedures (such as requiring workers to wear slip-resistant shoes), a safe epoxy floor coating reinforces your commitment to a safe work environment, also lessening the possibility of missed worker time due to injury and potential customer lawsuits.

Easy to Clean

Epoxy floors are relatively easily to clean. The shiny floor surface reflects spills easily, alerting workers to potential danger. Most spills are easy to clean up with a cleanser and water. To ensure additional safety, always encourage workers to set a “wet floor” sign after clearing a spill from the floor.

Additional Epoxy Applications

Epoxy flooring is useful in multiple working commercial and industrial environments, including garages, kitchens, warehouses, cafes, gyms and retail shops, ensuring safety in both customer and employee work areas. Some epoxy floor coatings are helpful beyond commercial flooring purposes and can be applied to ladders, indoor/outdoor conditions and employee shower areas to prevent falling.

Durability

Damaged flooring, carpeting or raised nails present safety hazards. With this type of industrial flooring, you’ll notice an increased durability in flooring surfaces. You’ll find that a good epoxy coated floor can easily withstand the wear and tear associated with heavy equipment like a forklift or production machine.

In addition to promoting safety in the workplace, epoxy flooring can also protect customers in retail-driven environments, making a safer environment for shoppers. Aside from preventing injury and offering a safe atmosphere and image, epoxy flooring can lower costs associated with customer and employee injury. Safe surfaces can also encourage employee confidence, allowing them to move quickly, productively and safely across the floor without worrying about the consequences of falling.

Purpose of Fire Internal Fire Doors

fire-doorsMost commercial buildings will have fire doors located throughout. Fire doors are used in specific locations in the building to prevent a fire from spreading form one room to another. Fire doors are typically located on door ways that open out onto hallways or staircases. These areas are used by the occupants of the building to escape in the event of a fire outbreak, therefore it is important that they are protected for as long as possible with fire doors.

During the design of the building a lot of thought goes into the necessary fire protection requirements. Internal fire doors are a key component. Doors are selected with particular performance levels in mind. Fire doors are graded in terms of time periods. A typical time period could be a half hour fire door. This means that the door will last for about 30 minutes before the integrity of the door will fail. Other fire doors may be one hour. This fire rated door may be used separating large compartments within the building. If a higher rated door is required, for example a four hour door, then a steel door may be required. This door might be used in a boiler room for example.

A typical fire door may look similar to any other non fire doors in the building. The difference will be the internal structure of the door. The internal core of the door will incorporate non combustible materials to help prolong the life of the door during a fire. The door itself is not the only component that makes up a designated fire door set. The door panel is obviously critical but it is useless if the door is left in the open position during a fire. To ensure that the door is always in the closed position, an automatic door closer is usually fitted at the top of the door. This is a spring loaded device mounted on the door and connected to the frame that will close the door every time after a person has gone through it.

Statistics have shown that smoke is one of the main causes of fatalities during a fire. For this reason it is important to prevent the movement of poisonous fumes around the building, especially into the escape routes. To prevent this, cold smoke seals are fitted to the edges of the fire doors. The cold smoke seals prevent smoke from passing between rooms. In-tumescent strips are also fitted to the door edges. This is another seal that will expand if subjected to intense heat, closing off the gap between the door edge and the door frame, stopping heat and fumes passing through and spreading the fire to the next compartment.